When Epson introduced the PX-16, they already had a long history in portable computing. The HX-20, PX-4, PX-8 (Geneva) are pre IBM-compatible machines (PX-4 and PX-8 are CP/M machines). The PX-16 is IBM PC-XT compatible but different from most comparable machines. The basic machine has no floppy or hard disk, but MS-DOS 3.2 in ROM and a RAM disk for file storage. My machine also has a PCMCIA like interface for RAM or EEPROM cards. The normal Epson extension for this slot is a printer.
The PX-16 has a battery pack for operation, an internal battery for memory retention and a 5V input for charging.
The disks are in a separate box, which can be attached to the PX-16 bottom. A special 80 pin cable connects both parts. The disk unit has its own set of batteries which are charged via the 80 pin cable.
|Front||Information on the PX-16 is scarse on the Internet.
Epson has nothing (apart from
an accidental occurance in some list).
The PX-16 seems to be targeted at the field service engineer. I deduce that from the multiple options to customize it for specific tasks.
One such an application I heard from a PX-16 user was controlling a Pager System at a broadcasting company and an airport, both in the U.K. The cartridge port was used for the propriatary interface and software in the ROM sockets. This system was still operational in 2004.
As was the case with the PX-4, the PX-16 was probably not or very limited marketed in the U.S.A.
|Semi-side||The PCMCIA card bay is not an Epson product. It is from
german company, which are still in PCMCIA business, but do not
support this product, the MEL-PX anymore. I mailed CSM and I got a
nice reply on which cards are used by the MEL-PX. These are:
Mitsubishi 60-Pin MEL-Cards (SRAM). As modern PCMCIA cards are 68 pins, this is a fairly non standard article. Info in the current MEL-Card family: www.melcard.de. A Texas Instruments MC1128K160-20 does not work :-(. The card is detected, but formatting fails.
Normal (68 pins) PCMCIA cards are not even detected.
From a nice visitor I learned the Texas Instruments card contains OTP-EPROM memory (TMS27PC512FR), no SRAM. No wonder writing doesn't work. The PROMS are connected directly to the bus, so the card has linear memory organisation, very probably this is also true for the MEL-card...
|With disk unit||The floppy is a 720KByte DD drive, the harddisk a 20Mbyte type.
single and dual floppy configurations were also an option.
Some more images: Info on the 26-pin HD interface.
|The D.I.Y. cable||This cable was missing. I made one by molesting several connectors bought from Digi-key and soldering them together. There were only 160 soldering points...|
Both the base unit batteries as the disk unit batteries were unusable due to shorts in the cells. By "zapping" the shorts, the battery can get usable again. This extended life span is very limited, but ok for demo purposes (the alternative is throwing the battery away and buy a new one). See the links below for more info on NiCd batteries.
Latest update: 2018-01-01